Hoshizaki
Showing all 10 results
-
Restaurant Equipment, Refrigeration Equipment, Merchandising & Display Refrigerators, Refrigerated Sushi Case
Sushi Case HNC-150BA-R-S
Hoshizaki’s HNC-150BA-R-S sushi case can help keep sushi products and other Asian delicacies attractive and fresh for your customers. This is a self-contained refrigerated unit that is easy to install, with a condenser that intakes air through the back and exhausts it out the side. It has solid food plates with a radius groove to maximize capacity and enable easy cleaning. The sushi case’s ceiling is easier to clean, putting less stress on the user.
SKU: n/a$2,320.00 -
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Under-counter Coolers & Freezers/ Chef Base
CRMR48-D2, Refrigerator, Two Section Undercounter, Drawer/Door Combo
- Dimensions: 48″ W x 30″ D x 33.63″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 2.3 kWh/day, at 2.6 Amps on a 5 – 15P NEMA Plug
- Drawer slides are constructed of 16 gauge stainless steel with acetal rollers
- Each drawer accommodates: (1) 1/2 size and (1) 1/3 size, 6″ deep pans (pans by others)
- Extruded aluminum flush mount drawer/door handles
- Magnetic drawer and door gaskets are easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Cabinet, doors, and drawers are insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Enamel coated evaporator coil for extended life
- Includes 2 stainless steel drawers,1 epoxy coated shelf
- Spring assisted self closing door, with stay open feature (field reversible)
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: 2.25″ or 6″ casters, drawer adapter bars, epoxy shelves, overshelves
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 36.5 “H at 241 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
- Drawer/Door units are made to order. Allow 4-6 weeks
SKU: n/a$1,942.00 -
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Refrigerators
CR2S-FS
- Dimensions: 55″ W x 34″ D x 79.5″ H
- Net capacity of 47.2 cubic feet
- Nominal Compres. of 2373 BTU/hr at 1/4 HP
- Electrical consumption of 2.48 kWh/day, at 7 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Doorss come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state control system with temperature alarms and LED display (°F or °C)
- R-134a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 6 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Factory installed (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 58 “W x 36.5 “D x 83 “H at 540 lbs
- ENERGY STAR® Qualified
- Five Years compressor warranty, Three Years parts and labor warranty
SKU: n/a -
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Hoshizaki CF1S-FS Freezer
CF1S-FS, Freezer, Single Section Upright, Full Stainless Door
- Disions: 27.5″ W x 34″ D x 79.5″ H
- Net capacity of 20.9 cubic feet
- Nominal Compres. of 2466 BTU/hr at 1/2 HP
- Electrical consumption of 5.38 kWh/day, at 9 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Door come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state digital controller with temperature alarms and LED display (°F or °C)
- R-404a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 3 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 31.5 “W x 39.5 “D x 83 “H at 360 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
SKU: n/a -
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Turbo Air M3F47-2-N 47cuft Reach In Freezer
Turbo Air Refrigeration is the ideal choice to meet the rigorous standards required by the food service industry. This stainless steel reach in freezer has double doors and a 47 Cu.ft. capacity. The digital temperature control system is efficient and can hold temperatures from -10°F to 5°F. The sleek ergonomically designed recessed door handles are standard with this unit, and is ideal in high traffic kitchen areas. The 6 shelf set up and the adjustable, heavy duty PVC Coated Wire Shelves helps to maximize storage. It’s a great buy for a high paced commercial kitchen.The highlighted feature in this unit is its amazing self cleaning condenser. This convenient feature will save you service time and labor costs!
Features:
- Self- Diagnostic System
- Comprehensive Diagnostic Defrost System
- Oversized and Balanced Refrigeration system (R404A)
- High Pressure Control For Compressor Protection
- 400 Series Stainless Steel Front and Sides Floor and Ceiling
- Foamed-in- Place Polyurethane High Density Cell Insulation (CFC Free)
- Minimum Wattage Heater in Cabinet Frame and Door
- Standard Background Improves Airflow
- Self-Contained System. No Plumbing Required
- 4″ Diameter Swivel Casters Standard
- Door Locks Standard
- Incandescent Interior Lighting
- Top Mount Compressor
- ETL listed
SKU: n/a -
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Pizza Prep Tables
Hoshizaki CPT67 Refrigerator Pizza Prep Table
- Dimensions: 67″ W x 32.25″ D x 43.5″ H
- Net capacity of 19.9 cubic feet
- Nominal Compres. of 2607 BTU/hr at 1/3 HP
- Electrical consumption of 5 kWh/day, at 5.5 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Front breathing air flow design
- Stainless steel exterior door with ABS interior liner
- Adjustable ducted air distribution system to suit any kitchen
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/3rd size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 67″ x 19″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 68.75 “W x 33.75 “D x 44.25 “H at 420 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
SKU: n/a -
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Sandwich Prep Tables
CRMR48-8 Refrigerator Two Section Sandwich Prep Table
- Dimensions: 48″ W x 30″ D x 45.2″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 4 kWh/day, at 2.9 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Magnetic door gasket is easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/6th size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves and 8 polycarbonate plastic 1/6th size pans, 4″ deep
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 48″ x 10″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 46.2 “H at 260 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
SKU: KU: CRMR48-8 -
Commercial Ice Maker, Ice Maker, Restaurant Equipment
KM-515MAJ Ice Maker Air-cooled
- Dimensions: 22″ W x 27-3/8″ D x 30-5/16″ H
- Up to 527 lbs of ice produced per 24 hours
- Mount 2 units side-by-side for 2x the ice production
- Produces crescent shaped ice cubes
- Durable stainless steel exterior
- Compatible bins & dispensers, sold separately: B-250, B-300, B-500, B-700, B-800, B-900, B-1150, B-1300, DB-130H, DB-200H, DM-200B
- EverCheck™ alert system
- CycleSaver™ design
- R-404A refrigerant (1 lb. 7.6 oz. / 670 g)
- Protected by H-GUARD Plus Antimicrobial Agent
- Ambient temperature range: 45 – 100°F
- Water temperature range: 45 – 90°F
- Water pressure: 10 – 113psig
- Voltage range: 104 – 127V
- 10.8 amps (20 Amp Max fuse)
- 5.3 kwh/100 lbs.@ 90/70
- Single phase, 115v/60/1, 3 wire, including ground
- Clean ice and easy maintenance lead to longer unit life span
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
SKU: KM-515MAJ -
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300SF Ice Storage Bin
- Dimensions: 22″ W x 32- 1/2 ” D x 46″ H
- Stores up to 300 lbs of ice
- Capacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Durable and easy to clean Stainless Steel exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
SKU: B-300SF -
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300PF Ice Storage Bin
- pacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Resilient Vinyl Clad exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
SKU: B-300PF
-
Restaurant Equipment, Refrigeration Equipment, Merchandising & Display Refrigerators, Refrigerated Sushi Case
Sushi Case HNC-150BA-R-S
Hoshizaki’s HNC-150BA-R-S sushi case can help keep sushi products and other Asian delicacies attractive and fresh for your customers. This is a self-contained refrigerated unit that is easy to install, with a condenser that intakes air through the back and exhausts it out the side. It has solid food plates with a radius groove to maximize capacity and enable easy cleaning. The sushi case’s ceiling is easier to clean, putting less stress on the user.
-
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Under-counter Coolers & Freezers/ Chef Base
CRMR48-D2, Refrigerator, Two Section Undercounter, Drawer/Door Combo
- Dimensions: 48″ W x 30″ D x 33.63″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 2.3 kWh/day, at 2.6 Amps on a 5 – 15P NEMA Plug
- Drawer slides are constructed of 16 gauge stainless steel with acetal rollers
- Each drawer accommodates: (1) 1/2 size and (1) 1/3 size, 6″ deep pans (pans by others)
- Extruded aluminum flush mount drawer/door handles
- Magnetic drawer and door gaskets are easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Cabinet, doors, and drawers are insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Enamel coated evaporator coil for extended life
- Includes 2 stainless steel drawers,1 epoxy coated shelf
- Spring assisted self closing door, with stay open feature (field reversible)
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: 2.25″ or 6″ casters, drawer adapter bars, epoxy shelves, overshelves
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 36.5 “H at 241 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
- Drawer/Door units are made to order. Allow 4-6 weeks
-
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Refrigerators
CR2S-FS
- Dimensions: 55″ W x 34″ D x 79.5″ H
- Net capacity of 47.2 cubic feet
- Nominal Compres. of 2373 BTU/hr at 1/4 HP
- Electrical consumption of 2.48 kWh/day, at 7 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Doorss come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state control system with temperature alarms and LED display (°F or °C)
- R-134a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 6 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Factory installed (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 58 “W x 36.5 “D x 83 “H at 540 lbs
- ENERGY STAR® Qualified
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Hoshizaki CF1S-FS Freezer
CF1S-FS, Freezer, Single Section Upright, Full Stainless Door
- Disions: 27.5″ W x 34″ D x 79.5″ H
- Net capacity of 20.9 cubic feet
- Nominal Compres. of 2466 BTU/hr at 1/2 HP
- Electrical consumption of 5.38 kWh/day, at 9 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Door come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state digital controller with temperature alarms and LED display (°F or °C)
- R-404a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 3 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 31.5 “W x 39.5 “D x 83 “H at 360 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Turbo Air M3F47-2-N 47cuft Reach In Freezer
Turbo Air Refrigeration is the ideal choice to meet the rigorous standards required by the food service industry. This stainless steel reach in freezer has double doors and a 47 Cu.ft. capacity. The digital temperature control system is efficient and can hold temperatures from -10°F to 5°F. The sleek ergonomically designed recessed door handles are standard with this unit, and is ideal in high traffic kitchen areas. The 6 shelf set up and the adjustable, heavy duty PVC Coated Wire Shelves helps to maximize storage. It’s a great buy for a high paced commercial kitchen.The highlighted feature in this unit is its amazing self cleaning condenser. This convenient feature will save you service time and labor costs!
Features:
- Self- Diagnostic System
- Comprehensive Diagnostic Defrost System
- Oversized and Balanced Refrigeration system (R404A)
- High Pressure Control For Compressor Protection
- 400 Series Stainless Steel Front and Sides Floor and Ceiling
- Foamed-in- Place Polyurethane High Density Cell Insulation (CFC Free)
- Minimum Wattage Heater in Cabinet Frame and Door
- Standard Background Improves Airflow
- Self-Contained System. No Plumbing Required
- 4″ Diameter Swivel Casters Standard
- Door Locks Standard
- Incandescent Interior Lighting
- Top Mount Compressor
- ETL listed
-
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Pizza Prep Tables
Hoshizaki CPT67 Refrigerator Pizza Prep Table
- Dimensions: 67″ W x 32.25″ D x 43.5″ H
- Net capacity of 19.9 cubic feet
- Nominal Compres. of 2607 BTU/hr at 1/3 HP
- Electrical consumption of 5 kWh/day, at 5.5 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Front breathing air flow design
- Stainless steel exterior door with ABS interior liner
- Adjustable ducted air distribution system to suit any kitchen
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/3rd size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 67″ x 19″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 68.75 “W x 33.75 “D x 44.25 “H at 420 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Sandwich Prep Tables
CRMR48-8 Refrigerator Two Section Sandwich Prep Table
- Dimensions: 48″ W x 30″ D x 45.2″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 4 kWh/day, at 2.9 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Magnetic door gasket is easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/6th size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves and 8 polycarbonate plastic 1/6th size pans, 4″ deep
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 48″ x 10″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 46.2 “H at 260 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
-
Commercial Ice Maker, Ice Maker, Restaurant Equipment
KM-515MAJ Ice Maker Air-cooled
- Dimensions: 22″ W x 27-3/8″ D x 30-5/16″ H
- Up to 527 lbs of ice produced per 24 hours
- Mount 2 units side-by-side for 2x the ice production
- Produces crescent shaped ice cubes
- Durable stainless steel exterior
- Compatible bins & dispensers, sold separately: B-250, B-300, B-500, B-700, B-800, B-900, B-1150, B-1300, DB-130H, DB-200H, DM-200B
- EverCheck™ alert system
- CycleSaver™ design
- R-404A refrigerant (1 lb. 7.6 oz. / 670 g)
- Protected by H-GUARD Plus Antimicrobial Agent
- Ambient temperature range: 45 – 100°F
- Water temperature range: 45 – 90°F
- Water pressure: 10 – 113psig
- Voltage range: 104 – 127V
- 10.8 amps (20 Amp Max fuse)
- 5.3 kwh/100 lbs.@ 90/70
- Single phase, 115v/60/1, 3 wire, including ground
- Clean ice and easy maintenance lead to longer unit life span
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
-
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300SF Ice Storage Bin
- Dimensions: 22″ W x 32- 1/2 ” D x 46″ H
- Stores up to 300 lbs of ice
- Capacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Durable and easy to clean Stainless Steel exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
-
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300PF Ice Storage Bin
- pacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Resilient Vinyl Clad exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
-
Restaurant Equipment, Refrigeration Equipment, Merchandising & Display Refrigerators, Refrigerated Sushi Case
Sushi Case HNC-150BA-R-S
Hoshizaki’s HNC-150BA-R-S sushi case can help keep sushi products and other Asian delicacies attractive and fresh for your customers. This is a self-contained refrigerated unit that is easy to install, with a condenser that intakes air through the back and exhausts it out the side. It has solid food plates with a radius groove to maximize capacity and enable easy cleaning. The sushi case’s ceiling is easier to clean, putting less stress on the user.
$2,320.00 -
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Under-counter Coolers & Freezers/ Chef Base
CRMR48-D2, Refrigerator, Two Section Undercounter, Drawer/Door Combo
- Dimensions: 48″ W x 30″ D x 33.63″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 2.3 kWh/day, at 2.6 Amps on a 5 – 15P NEMA Plug
- Drawer slides are constructed of 16 gauge stainless steel with acetal rollers
- Each drawer accommodates: (1) 1/2 size and (1) 1/3 size, 6″ deep pans (pans by others)
- Extruded aluminum flush mount drawer/door handles
- Magnetic drawer and door gaskets are easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Cabinet, doors, and drawers are insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Enamel coated evaporator coil for extended life
- Includes 2 stainless steel drawers,1 epoxy coated shelf
- Spring assisted self closing door, with stay open feature (field reversible)
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: 2.25″ or 6″ casters, drawer adapter bars, epoxy shelves, overshelves
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 36.5 “H at 241 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
- Drawer/Door units are made to order. Allow 4-6 weeks
$1,942.00 -
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Refrigerators
CR2S-FS
- Dimensions: 55″ W x 34″ D x 79.5″ H
- Net capacity of 47.2 cubic feet
- Nominal Compres. of 2373 BTU/hr at 1/4 HP
- Electrical consumption of 2.48 kWh/day, at 7 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Doorss come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state control system with temperature alarms and LED display (°F or °C)
- R-134a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 6 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Factory installed (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 58 “W x 36.5 “D x 83 “H at 540 lbs
- ENERGY STAR® Qualified
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Hoshizaki CF1S-FS Freezer
CF1S-FS, Freezer, Single Section Upright, Full Stainless Door
- Disions: 27.5″ W x 34″ D x 79.5″ H
- Net capacity of 20.9 cubic feet
- Nominal Compres. of 2466 BTU/hr at 1/2 HP
- Electrical consumption of 5.38 kWh/day, at 9 Amps on a 5 – 15P NEMA Plug
- Exclusive stepped door design to protect recessed magnetic door gasket
- Spring assisted self closing lockable doors with stay open feature (field reversible with optional kit)
- One piece, full length, extruded aluminum flush mount door handle
- Unique “ducted” air distribution system
- Full Stainless Door come standard with locks
- Insulated with 2 3/8″ CFC free, foamed in place polyurethane
- Stainless steel interior with stainless steel exterior front and sides
- Solid state digital controller with temperature alarms and LED display (°F or °C)
- R-404a refrigerant
- Refrigerant flow is controlled with a thermostatic expansion valve (TXV)
- Epoxy electrocoated (E-Coat) evaporator coil to help fight corrosion
- Includes 3 epoxy coated wire shelves
- Stainless steel supports adjustable in 1″ increments
- Standard with (4) 4″ Stem Casters (2 with brakes)
- Optional kits: Additional epoxy or stainless steel shelves, universal tray/pan slides, foot pedal door opener, door reversal kit, air filter
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 31.5 “W x 39.5 “D x 83 “H at 360 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Reach-In Refrigerators & Freezers, Reach-In Freezers
Turbo Air M3F47-2-N 47cuft Reach In Freezer
Turbo Air Refrigeration is the ideal choice to meet the rigorous standards required by the food service industry. This stainless steel reach in freezer has double doors and a 47 Cu.ft. capacity. The digital temperature control system is efficient and can hold temperatures from -10°F to 5°F. The sleek ergonomically designed recessed door handles are standard with this unit, and is ideal in high traffic kitchen areas. The 6 shelf set up and the adjustable, heavy duty PVC Coated Wire Shelves helps to maximize storage. It’s a great buy for a high paced commercial kitchen.The highlighted feature in this unit is its amazing self cleaning condenser. This convenient feature will save you service time and labor costs!
Features:
- Self- Diagnostic System
- Comprehensive Diagnostic Defrost System
- Oversized and Balanced Refrigeration system (R404A)
- High Pressure Control For Compressor Protection
- 400 Series Stainless Steel Front and Sides Floor and Ceiling
- Foamed-in- Place Polyurethane High Density Cell Insulation (CFC Free)
- Minimum Wattage Heater in Cabinet Frame and Door
- Standard Background Improves Airflow
- Self-Contained System. No Plumbing Required
- 4″ Diameter Swivel Casters Standard
- Door Locks Standard
- Incandescent Interior Lighting
- Top Mount Compressor
- ETL listed
-
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Pizza Prep Tables
Hoshizaki CPT67 Refrigerator Pizza Prep Table
- Dimensions: 67″ W x 32.25″ D x 43.5″ H
- Net capacity of 19.9 cubic feet
- Nominal Compres. of 2607 BTU/hr at 1/3 HP
- Electrical consumption of 5 kWh/day, at 5.5 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Front breathing air flow design
- Stainless steel exterior door with ABS interior liner
- Adjustable ducted air distribution system to suit any kitchen
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/3rd size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 67″ x 19″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 68.75 “W x 33.75 “D x 44.25 “H at 420 lbs
- Energy efficient non-electric evaporation system
- Five Years compressor warranty, Three Years parts and labor warranty
-
Restaurant Equipment, Refrigeration Equipment, Refrigerated Prep Tables, Sandwich Prep Tables
CRMR48-8 Refrigerator Two Section Sandwich Prep Table
- Dimensions: 48″ W x 30″ D x 45.2″ H
- Net capacity of 11.95 cubic feet
- Nominal Compres. of 1029 BTU/hr at 1/6 HP
- Electrical consumption of 4 kWh/day, at 2.9 Amps on a 5 – 15P NEMA Plug
- Exclusive “stepped” door design to protect recessed door gasket
- Spring assisted self closing door, with stay open feature (field reversible without kit)
- Extruded aluminum flush mount door handle
- Magnetic door gasket is easily removable for cleaning
- Stainless steel exterior door with ABS interior liner
- Insulated with 2″ CFC free, foamed in place polyurethane
- Stainless steel exterior front, sides and top with stainless steel interior
- Engineered to maintain food safe temperatures in 100°F ambient conditions
- R-134a refrigerant
- Provided with a full complement of plastic 1/6th size pans, 4″ deep and adapter bars
- Enamel coated evaporator coil for extended life
- Includes 2 epoxy coated shelves and 8 polycarbonate plastic 1/6th size pans, 4″ deep
- Epoxy coated wire shelves adjustable in 1/2″ increments on anodized aluminum supports
- Standard with (4) 6″ Stem Casters (2 with brakes)
- 48″ x 10″ x 1/2″ thick white polyethylene cutting board is standard
- 115v/60/1, 8 ft. cord and plug
- Shipping Crate: 52.5 “W x 34 “D x 46.2 “H at 260 lbs
- Energy efficient automatic hot gas condensate evaporator
- Five Years compressor warranty, Three Years parts and labor warranty
-
Commercial Ice Maker, Ice Maker, Restaurant Equipment
KM-515MAJ Ice Maker Air-cooled
- Dimensions: 22″ W x 27-3/8″ D x 30-5/16″ H
- Up to 527 lbs of ice produced per 24 hours
- Mount 2 units side-by-side for 2x the ice production
- Produces crescent shaped ice cubes
- Durable stainless steel exterior
- Compatible bins & dispensers, sold separately: B-250, B-300, B-500, B-700, B-800, B-900, B-1150, B-1300, DB-130H, DB-200H, DM-200B
- EverCheck™ alert system
- CycleSaver™ design
- R-404A refrigerant (1 lb. 7.6 oz. / 670 g)
- Protected by H-GUARD Plus Antimicrobial Agent
- Ambient temperature range: 45 – 100°F
- Water temperature range: 45 – 90°F
- Water pressure: 10 – 113psig
- Voltage range: 104 – 127V
- 10.8 amps (20 Amp Max fuse)
- 5.3 kwh/100 lbs.@ 90/70
- Single phase, 115v/60/1, 3 wire, including ground
- Clean ice and easy maintenance lead to longer unit life span
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
-
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300SF Ice Storage Bin
- Dimensions: 22″ W x 32- 1/2 ” D x 46″ H
- Stores up to 300 lbs of ice
- Capacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Durable and easy to clean Stainless Steel exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
-
Commercial Ice Maker, Ice Bin & Dispenser, Restaurant Equipment
B-300PF Ice Storage Bin
- pacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
- Resilient Vinyl Clad exterior
- Polyethylene bin liner for sanitary ice storage
- Foamed-in-place polyurethane insulation
- Protected by H-GUARD Plus Antimicrobial Agent
- For top-mounted ice maker, top kits sold separately (See spec sheet for details)
- Top-hinged front-opening bin door
- Sturdy construction capable of supporting stacked ice machine configurations
- Standard with 6″ Painted Flange Legs
- Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
- 3/4″ FPT drain
- 135 lbs
- Two Years: Parts & Labor warranty (Before January 2012 production)
